This model is only available from Shapeways.  It cannot be printed in gray resin.  Click here to buy this model from Shapeways.  For answers to printing and shipping questions about this model, please contact Shapeways' customer service.


Scale: 1/200

Recommended for:

  • Answer-Angraf 1/200 scale USS Ticonderoga CV-14 
  • and more!


This accurate and highly detailed model represents the post-May, 1945 refit "long-bridge" island of USS Lexington CV-16 as it appeared from late May, 1945 through the end of the war.  It was in this configuration during attacks on the Japanese mainland. 

This appearance reflects modifications made during April-May, 1945 at Puget Sound.  Changes include the removal of the forward-most Bofors mount and tub, enlarging of her flag plot and navigating bridge, changes to the shape of her navigating bridge and flag plot decks and associated splinter shielding, the shape of the mast-top radar platform was changed and enlarged aft, as well as removal of some of the starboard-side 20mm Oerlikon mounts and shortening of their platforms. 

This 3D-printed model includes integrated venturis (wind deflectors) on splinter shielding forward of the navigating bridge and air defense deck.

This 3D-printed design captures features specific to USS Lexington, differing from other 3D-printed Essex class aircraft carrier island designs available separately.


  • fully assembled
  • scaled dimensions match official US Navy Booklet of General Plans drawings for USS Antietam CV-36, as well as scaled drawings by John Roberts appearing in "Anatomy of the Ship: The Aircraft Carrier Intrepid", with details adjusted to match photos of the ship
  • splinter shielding and deck shape for the flag bridge and navigating bridge are accurate to USS Lexington for May-December, 1945
  • accurately shaped, detailed and positioned doors of three different types with chevron-shaped rain deflector detail (most doors are positioned open)
  • accurately sized and positioned open portholes, of two different sizes, with rigol ("eyebrow") details
  • accurately shaped decks and catwalks
  • deck supporting structure details accurately positioned as confirmed by photos of the real ship
  • open battle lookouts
  • accurately raised funnel cap exhausts
  • accurately curved funnel cap grilles
  • open funnel uptakes completely through the island, with correct bend in rear uptake
  • open flag lockers
  • accurate exterior cabling detail
  • Bofors tubs spent shell casing chutes
  • formation lights on searchlight platform splinter shield
  • primary flight control station "PriFly" splinter shield detailing
  • funnel access scuttle
  • exterior steam pipes for ship's whistles
  • integrated venturi (wind deflectors) on splinter shields around the pilot house and air defense station
  • antenna connector boxes with integrated insulator detail (starboard)
  • subtle, raised locator discs on decks and platforms to aid in the placement of 40mm Bofors mounts, 20mm Oerlikon guns and searchlights (Bofors, Oerlikons and searchlights are not included)
  • integrated tripod mast with ship's bell

This model is scaled to represent the features of the actual ship based on the best, authoritative references available.  It is NOT a 3D-printed copy of any metal, plastic or resin kit's parts therefore it may be sized and shaped differently than the parts in your plastic or resin kit.  Some adjustment to your kit's parts or other aftermarket sets such as photo etch or wood decks may be needed for best fit.


© Model Monkey Book and Hobby.  This 3D-printed item may not be copied or recast.

1/200 USS Lexington CV-16 Island, May-December 1945

SKU: 200-CV16-1945