.png){kind=small}
.jpg){kind=small}
Recommended only for expert modelers with considerable modeling experience. This model kit includes many separate parts, some of which are fragile, and requires painting and assembly. Support removal is difficult therefore this model is not recommended for beginners or novices.
Free assembly and painting guide in A4 format (click here).
Free assembly and painting guide in 8.5" x 11" format (click here).
This model is very large and therefore requires an extraordinary amount of time to print. Please allow additional production time.
Scale: 1/32
Recommended to help build a radar-equipped Beaufighter NF Mk.I, NF Mk.II or NF Mk.VI from:
- Revell 1/32 scale Bristol Beaufighter Mk.IF Night Fighter
- Revell/Lodela 1/32 scale Bristol Beaufighter Mk.IF
- and more!
This accurate and highly detailed model provides major components of the radar operator's station of early World War Two-era Bristol Beaufighters equipped with AI Mk.IV radar. Although specific details differed significantly between aircraft in the field, features of this model best represent those of early nightfighter Beaufighters armed with ammunition drum-fed Hispano-Suiza 20 mm cannons.
This model has features that aid in attaching it to a Model Monkey 1/32 scale Beaufighter cockpit, available separately (click here).
Notice: Supporting sprue removal is difficult. Click here for support removal advice and assembly and painting tips.
Instrument decals are not included with this 3D-printed model. Click here for cockpit instrument decals from Airscale.
Click here for Beaufighter aircraft marking decals and aircraft data stencil decals from Aviaeology.
This model is not a 3D-printed copy of any plastic or resin kit's parts. Therefore, it is sized, shaped and detailed very differently than the parts in your Revell kit. Despite every effort being made to ensure a good fit to your Revell kit, some adjustment to your Revell kit's parts may be needed for best fit.
The Revell kit's observer figure will not fit in the accurately scaled 3D-printed observer's seat. The Revell figure is too big.
If you need to clean these parts, isopropyl (rubbing) alcohol is recommended. Do not use acetone. Acetone can melt 3D-printed plastic.
© Model Monkey LLC. This 3D-printed product may not be copied or recast.