Scale: 1/350

Recommended for:

  • Trumpeter 1/350 USS Lexington CV-2
  • Trumpeter 1/350 USS Saratoga CV-3 
  • and more!

 

This set represents the 3 anchors fir to aircraft carriers USS Lexington CV-2 and USS Saratoga CV-3.

 
Other sets of anchors, uniquely configured for pre-war battleships, fast battleships, World War-two-era aircraft carriers and modern aircraft carriers are available separately.

Assembly instructions: remove all parts from the sprue, insert the shank through the bottom of the anchor.  Do not glue the shank to the anchor.  A small retaining pin is needed to hold the shank in the crown (the bottom of the flukes).  This part is too small in diameter to be printed.  Use another material such as a small wire, 0.4mm in diameter or smaller.  Insert your retaining pin through the small hole at the bottom of the anchor and glue in place.  The shank will then swivel freely.

These parts are designed for a tight fit.  While producing exceptional detail, acrylic plastic is extremely brittle and breaks easily.  Trim parts, if necessary, rather than force them into place.


© Model Monkey Book and Hobby.  This 3D-printed item may not be copied or recast.

 

Model Monkey Lexington class products:
USS Lexington CV-2​

  • USS Lexington Island 1936-1940
  • USS Lexington Island 1942 (Battle of the Coral Sea)
  • USS Lexington Funnel 1928-1935
  • USS Lexington Funnel 1936-1940
  • USS Lexington Funnel 1941
  • USS Lexington Funnel 1942 (Battle of the Coral Sea)
  • USS Lexington 1942 Alternative Splinter Shields (Round-ended – Battle of the Coral Sea)
  • USS Lexington and USS Saratoga 8"/55 Turrets 1928-1941
  • USS Lexington and USS Saratoga rudder
  • Anchors for USS Lexington CV-2 and USS Saratoga CV-3 (set of 3)

USS Saratoga CV-3

  • USS Saratoga Island 1931-1932
  • USS Saratoga Island 1933-1935
  • USS Saratoga Island 1936-1940
  • USS Saratoga Island 1941 (flight deck widened forward and lengthened aft)
  • USS Saratoga Island 1942 (Battles of the Eastern Solomons and Guadalcanal)
  • USS Saratoga Island 1943 (Raids on Bouganville, Rabaul, and the Gilbert and Marshall Islands Campaign)
  • USS Saratoga Island 1944-1945 (Battle for Okinawa)
  • USS Saratoga Funnel 1928-1940
  • USS Saratoga Funnel 1941-1942
  • USS Saratoga Funnel 1942-1943
  • USS Saratoga Funnel 1944-1945
  • USS Lexington and USS Saratoga 8"/55 Turrets 1928-1941
  • USS Lexington and USS Saratoga rudder
  • USS 5"/38 Mk.32 Twin Mounts (turrets) - for Saratoga 1942-1946
  • Anchors for USS Lexington CV-2 and USS Saratoga CV-3 (set of 3)

1/350 Anchors for USS Lexington CV-2 and USS Saratoga CV-3

SKU: 350-anchors-CV2-class-3
$4.00Price
     

    ©2019 by Model Monkey. Proudly created with Wix.com