©2019 by Model Monkey. Proudly created with Wix.com

Scale: 1/96   (1/8 inch = 1 foot)

 

Set includes 2 anchors with shanks.


Recommended for:

  • CNC 1/96 scale USS Allen M. Sumner DD-692 1944 Superstructure
  • CNC 1/96 scale USS Allen M. Sumner DD-692 1960 Superstructure
  • CNC 1/96 scale Fletcher Class Round Bridge Superstructure
  • CNC 1/96 scale Fletcher Class Square Bridge Superstructure
  • CNC 1/96 scale Fletcher Class FRAM Superstructure
  • CNC 1/96 scale USS Gearing DD-710 1945 Superstructure
  • CNC 1/96 scale USS Gearing DD-710 FRAM Superstructure
  • Deans Marine 1/96 scale USS Kidd DD-661
  • The Scale Shipyard 1/96 scale USS Ward DD-139
  • The Scale Shipyard 1/96 scale USS Bainbridge DD-246
  • The Scale Shipyard 1/96 scale USS Farragut DD-348
  • The Scale Shipyard 1/96 scale USS Porter DD-356
  • The Scale Shipyard 1/96 scale USS Gridley DD-380
  • The Scale Shipyard 1/96 scale USS Somers DD-381
  • The Scale Shipyard 1/96 scale USS Benham DD-397
  • The Scale Shipyard 1/96 scale USS Sims DD-409
  • The Scale Shipyard 1/96 scale USS Benson DD-421
  • The Scale Shipyard 1/96 scale USS Fletcher DD-445
  • The Scale Shipyard 1/96 scale USS Pritchett DD-561
  • The Scale Shipyard 1/96 scale USS Kidd DD-661
  • The Scale Shipyard 1/96 scale USS Allen M. Sumner DD-692 
  • The Scale Shipyard 1/96 scale USS Gearing DD-710
  • The Scale Shipyard 1/96 scale USS Maddox DD-731
  • The Scale Shipyard 1/96 scale USS Glennon DD-840
  • The Scale Shipyard 1/96 scale USS Joseph P. Kennedy Jr. DD-850
  • The Scale Shipyard 1/96 scale USS Rudderow DE-224 
  • The Scale Shipyard 1/96 scale USS Samuel B. Roberts DE-413
  • The Scale Shipyard 1/96 scale USS England DE-635
  • The Scale Shipyard 1/96 scale USCGC Roger B. Taney WPG-37 hull
  • The Scale Shipyard 1/96 scale USCGC Hamilton WHEC-715 hull
  • and more!

 

This set of model anchors is patterned on the US Navy's standard 4,000 pound anchors used on destroyers, destroyer escorts, auxiliaries and other similarly sized vessels from the 1930s onward.

Assembly instructions: remove all parts from the sprue, insert the shank through the bottom of the anchor.  Do not glue the shank to the anchor.  Insert the retaining pin through the small hole at the bottom of the anchor and glue in place.  The shank will swivel freely.

These parts are designed for a tight fit.  While producing exceptional detail, acrylic plastic is brittle and breaks easily.  Trim parts, if necessary, rather than force them into place.

These 3D-printed acrylic parts are designed to accurately represent features of the actual ship based on official Navy blueprints.


© Model Monkey Book and Hobby.  This 3D-printed item may not be copied or recast.

1/96 Anchors for Destroyers, Destroyer Escorts, etc., 4,000 lbs.

SKU: 96-anchors-DD
$8.00Price